Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Simulating electric field distortion

Posted Jul 5, 2012, 5:26 p.m. EDT Low-Frequency Electromagnetics, Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.0a 1 Reply

A CR
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I am looking to determine the slight polarization of some polymers under a electric field. Do you think it is possible to do it with the COMSOL multiphysics?

P.S.: The idea is to produce 2D plot (sqrt(es.Ex*es.Ex+es.Ey*es.Ey) with and without the polymeric material within the field, and compare them.


Best
1 Reply Last Post Jul 6, 2012, 3:16 a.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jul 6, 2012, 3:16 a.m. EDT
Hi

why shuld it be possibe ?, but you will need to write out your equation a bit, then it should, you have access to the details of the equations when you wish. But I would use rather the latest version and notthe early4.0.

--
Good luck
Ivar
Hi why shuld it be possibe ?, but you will need to write out your equation a bit, then it should, you have access to the details of the equations when you wish. But I would use rather the latest version and notthe early4.0. -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content