Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Equilibrium reactions in COMSOL

Posted Jul 8, 2012, 4:45 a.m. EDT Porous Media Flow, Chemical Reaction Engineering, Studies & Solvers Version 4.3 0 Replies

Nawaz Ahmad
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I have following four reactions and want to model them as equilibrium reactions in the "transport of diluted species" interface;

r1: H2O<=>H++OH-
r2: CO2aq+H2O<=>H++HCO3-
r3: HCO3-<=>H++CO3--
r4: Na++HCO3-<=>NaHCO3aq

I need guidance about how to set equilibrium reactions within "transport of diluted species" interface. Attached is mph file to have a look how I tried to define these equilibrium reactions in the form of algebraic relations.

Solution converges for specified initial and boundary conditions. However, I am not sure about the formulation of equilibrium reactions in COMSOL.


Best Regards,

Nawaz Ahmad
KTH
0 Replies Last Post Jul 8, 2012, 4:45 a.m. EDT
COMSOL Moderator

Hello Nawaz Ahmad

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content