Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Slip Boundary Conditions

Posted Jul 8, 2012, 3:25 p.m. EDT MEMS & Nanotechnology, Fluid & Heat, MEMS & Piezoelectric Devices, Computational Fluid Dynamics (CFD) Version 4.2a 1 Reply

Mohamed Zanaty
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi All,

Is there a way to apply slip velocity conditions on the solid fluid interface for FSI physics. Nomrally, at the interface , the fluid has the same velocity as the solid (ufluid = d(u_sloid)/dt). Is there any way to inlcude the slip velocity change at the interface based on MAxwell model?
I want to include air rareaction for the study

Thanks in advance

Regards,
Mohamed
1 Reply Last Post Jul 9, 2012, 4:05 p.m. EDT
Mohamed Zanaty
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jul 9, 2012, 4:05 p.m. EDT
ANY Heeeeeeeeeeeeeeellllllllllllllllllllllllppppppppppppppppppp!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ANY Heeeeeeeeeeeeeeellllllllllllllllllllllllppppppppppppppppppp!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content