Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

On setting thermal boundary conditions

Posted Jan 25, 2022, 5:37 a.m. EST Wave Optics Version 5.5 0 Replies

Riku Imanishi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi, am thinking of a rectangular model composed of air, 3nmAu , and quartz glass in that order.We want to consider the heating of Au when light is incident on it. The left and right sides of the rectangle are set to periodic conditions, but which conditions should be used for the top and bottom edges? When the temperature was fixed at 20°C, sufficient heating did not occur due to the close proximity to the gold. There may be some flaws in my English, but please help me.

0 Replies Last Post Jan 25, 2022, 5:37 a.m. EST
COMSOL Moderator

Hello Riku Imanishi

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content