Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

magnetic field intensity

Posted Jul 17, 2012, 5:04 a.m. EDT Low-Frequency Electromagnetics Version 4.2a 0 Replies

kishore naik
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Dear sir ,
I am doing simulation of a single coil to find differnt parameters like Magnetic field intensity (H) , Inductance of coil , i excite the coil with single turn of coil with currnet 1 A , The magnetic field intensity of a coil is H= I/2r , where I is current of coil and r is radius of coil
If i take radius is 0.35m and current of coil 1 A , i should get H= 1.42 A/m , but i am not getting and getting less ...could tell the what is problem and solution
Model is attached

--
kishore Naik Mude
0 Replies Last Post Jul 17, 2012, 5:04 a.m. EDT
COMSOL Moderator

Hello kishore naik

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content