Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Can't Enable Surface Equilibrium Reactions in Transport for Diluted Species
Posted Feb 28, 2022, 1:12 p.m. EST Chemical Reaction Engineering Version 5.5 0 Replies
Please login with a confirmed email address before reporting spam
Hi, I've been trying to set up a simulation using the chemical engineering module on COMSOL 5.5. I am trying to recreate the two-site binding model on a silicon dioxide surface, which is governed by the chemical reactions: SiOH <=> SiO- + H+ SiOH2+ <=> SiOH + H+ I set these reactions up using the reaction engineering physics in a 0D component, then generate the space dependent model. The Chemistry and Surface Reaction physics is set up fine, but the Surface Equilibrium Reactions are greyed out under transport for diluted species (see attached photo) and can't be enabled. I have found that by adding species to the reactions then the Surface Equilibrium Reactions can be enabled, so I didn't know whether this is a specific limitation on the types of reactions. I can cahnge the reactions to reversible and set the reaction rate very high as a work around, but I was wondering if there was any way get these reactions to work as equilibrium reactions. Best, Lewis
Attachments:
Hello Lewis Keeble
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.