Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Transforms>Scale
Posted Aug 7, 2012, 2:53 a.m. EDT Geometry Version 4.3 1 Reply
Please login with a confirmed email address before reporting spam
Hi!
I need to scale an object imported through CAD import module. I set center of scaling to (0,0,0). But when I do the scaling my object moves! It happens for both isotropic and anisotropic scaling. I've found that scaling works only when main faces of my object are parallel to the axis and scale factor doesn't equal to one for the only one direction.
Could anybody answer me why it happens and what can I do to fix it? Is it a bug?
Thanks a lot.
Liza
I need to scale an object imported through CAD import module. I set center of scaling to (0,0,0). But when I do the scaling my object moves! It happens for both isotropic and anisotropic scaling. I've found that scaling works only when main faces of my object are parallel to the axis and scale factor doesn't equal to one for the only one direction.
Could anybody answer me why it happens and what can I do to fix it? Is it a bug?
Thanks a lot.
Liza
1 Reply Last Post Aug 13, 2012, 1:57 a.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
where is you object placed w.r.t. centre of scaling ?
if it's not "centred" it will certainly "move"
--
Good luck
Ivar
where is you object placed w.r.t. centre of scaling ?
if it's not "centred" it will certainly "move"
--
Good luck
Ivar