Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to plot two or more independent vaiables in one plot?

Posted Aug 13, 2012, 2:04 p.m. EDT Version 4.3 2 Replies

Mahmood Mamivand
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,
I am solving some PDEs and I want to plot 2 or more independent variables in one plot. how can I do this?
2 Replies Last Post Aug 14, 2012, 8:58 a.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Aug 14, 2012, 1:07 a.m. EDT
Hi

you can add as many subnode as desired under a first plot (3D/2D/1D/global) node

--
Good luck
Ivar
Hi you can add as many subnode as desired under a first plot (3D/2D/1D/global) node -- Good luck Ivar
Mahmood Mamivand
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Aug 14, 2012, 8:58 a.m. EDT
Hi,
How can I do that? Actually I add surface plot as many as my variables but 2D plot group does not show them in one plot.
Hi, How can I do that? Actually I add surface plot as many as my variables but 2D plot group does not show them in one plot.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content