Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
to extract only the geometrical information after deformation
Posted Aug 20, 2012, 12:39 a.m. EDT Geometry, Materials, Modeling Tools & Definitions, Parameters, Variables, & Functions, Results & Visualization, Structural Mechanics Version 4.2a 0 Replies
Please login with a confirmed email address before reporting spam
Recently I met with a problem about how to extract only the geometrical information after deformation, meanwhile I want to discard the material and physical information (such as stress, stain, etc.). Because I want to reuse the geometrical shape after deformation and put it into a new assembly to do a new analysis, and this new analysis only needs this model’s geometrical shape without any pre-stress and pre-strain.
Does anybody met with the similar problem? Thanks!
Hello Zhengui Zhang
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.