Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Modeling thin air layer between vibrating solids
Posted Jul 13, 2022, 8:44 a.m. EDT Structural & Acoustics, Acoustics & Vibrations 1 Reply
Please login with a confirmed email address before reporting spam
Dear forum users! I model vibroacoustics of a solid structure, consisting of several parts, in a frequency domain (Solid mechanics module). The structure itself is in the air. Some parts are very close to each other, but don't contact to each other. How can I set boundary conditions at the boundary of these parts (instead of fully modeling the pressure acoustics in the air gap between them) to take into account action of only normal vibrations of one solid on the other and the absence of tangential forces of one solid on the other? Thank you!
Hello Anton Ignatov
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam
You may have to look into analytical models for this https://ris.utwente.nl/ws/portalfiles/portal/6075267/t000000b.pdf
-------------------René Christensen, PhD
Acculution ApS
www.acculution.com
info@acculution.com