Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Regarding applying AC pulse electrical current parameters to model builder

Posted Aug 31, 2022, 2:40 a.m. EDT 1 Reply

Thilini Dhanushka
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

in my research I'm doing a tensile test while applying AC pulse electric current.

parameters of AC pulse are, peak current - 500A "ON" time period- 50ms "OFF" time period - 0.6s

this pulse will go through the test pice until fracture.

I want to know how should I give this pulse AC parametes to modle builder.

please be kind enough to explain this for me

thank you

1 Reply Last Post Aug 31, 2022, 12:07 p.m. EDT
Dave Greve
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 years ago Aug 31, 2022, 12:07 p.m. EDT

Global Definitions > Functions > Pulse

If it's not an infinite sinusoid it's not AC.

Global Definitions > Functions > Pulse If it's not an infinite sinusoid it's not AC.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content