Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to impsoe magnetic force on magnetic fluid in 3D magnetostatic field (no currents)

Posted Sep 4, 2012, 7:32 a.m. EDT Low-Frequency Electromagnetics, Fluid & Heat Version 3.5a 0 Replies

Homeland
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

All

I want to deal with a simulation of magnetic fluid in 3D magnetostatic field (no currents) produced by permanent

magnets, but I do not know how to how to impsoe magnetic force on magnetic fluid.

Your help are highly appreciated!

Thanks.
0 Replies Last Post Sep 4, 2012, 7:32 a.m. EDT
COMSOL Moderator

Hello Homeland

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content