Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

radiation in solids

Posted Sep 20, 2012, 6:47 a.m. EDT Version 4.2 1 Reply

Swetha S
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

i need to apply radiation as input for my model.. i used thermal stress physics. The radiation energy must be converted in terms of W/m3. I dont know how to convert. Please help.
1 Reply Last Post Sep 20, 2012, 9:16 a.m. EDT
Nagi Elabbasi Facebook Reality Labs
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Sep 20, 2012, 9:16 a.m. EDT
I am not sure I understand you correctly. You can apply a radiation boundary condition on the surfaces of a solid either as surface-to-ambient radiation or surface-to-surface radiation.
I am not sure I understand you correctly. You can apply a radiation boundary condition on the surfaces of a solid either as surface-to-ambient radiation or surface-to-surface radiation.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content