Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Thermoelectric PDE mode
Posted Sep 28, 2012, 4:21 a.m. EDT Heat Transfer & Phase Change, Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.2a 1 Reply
Please login with a confirmed email address before reporting spam
Hello Sir,
I am a new user of COMSOL. Currently I'm working on a model for a thermoelectric generator using PDE mode. After done with the layout, in the post processing result the temperature profile seems appropriate but I can't seem to obtain the right distribution for the voltage. When I did modifications on the dimension size or increase the N pairs, I get the same results as if no modifications have been made.
Therefore I have decided to use the custom physics interfaces as per attach files. However we still facing problems with some of the features. For example under Physics Interface 1 (UM_megat), Feature 1, 2, and 4, the COMSOL pop up message state that there are errors in syntax we used. Appreciate if you could review the file. We really need your help or suggestions to solve this error.
I am also not sure on how to specify the electrical and temperature boundary conditions correctly. If you have any working modules, appreciate if you could send to me.
Thank you.
Best Regards,
Megat
Attachments:
Hello Megat Muhammad Ikhsan Megat Hasnan
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam