Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
No "Contact" option for Solid Mechanics Physics
Posted Mar 14, 2023, 5:55 p.m. EDT Structural Mechanics, Modeling Workflow, Physics Interfaces Version 5.6 2 Replies
Please login with a confirmed email address before reporting spam
I am working on testing a solid mechanics simulation and have been following along with the guide. Everything is working out fine, creating contact pairs, using Form Assembly, etc. but when the guide says to add a "contact" condition for the pairs in the physics there is no "contact" option. I'm not sure if options have changed or if I am missing something.
Attachments:
Please login with a confirmed email address before reporting spam
Check under Licensed and Used Products. Your GUI looks like you don't have the license for the Structural Mechanics Module, but just the basic solid mechanics functionality that comes with COMSOL Multiphysics itself.
-------------------Henrik Sönnerlind
COMSOL
Please login with a confirmed email address before reporting spam
Henrick,
That looks like the issue. Thanks for your help with this.