Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Boundary overridden
Posted Apr 14, 2023, 4:05 a.m. EDT Porous Media Flow, Modeling Workflow 0 Replies
Please login with a confirmed email address before reporting spam
Hi, everyone. In my 1D work, I try to model an infiltration flow and after a period of time the infiltration stops and starts the evaporation process and this for the same period as the infiltration. I applied on the upper boundary the boundary conditions: Inlet and Outlet. To do this, I use the functions: step1: Location 100, from 0 to 1 (for Inlet boundary condition) step2: Location 100, from 1 to 0 (for Outlet boundary condition) Unfortunately, it didn't work. If I start with Inlet first, then Outlet, the latter becomes inactive (Overridden) and vice versa. Could you help me to solve this problem. Thanks in advance.
Hello Ahmed CHETTI
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.