Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

To draw a packed bed filled with spherical particles

Posted Nov 6, 2012, 4:19 p.m. EST Version 4.3 1 Reply

Raul Rodriguez
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam


Hi, I am wondering if it is possible to draw a packed bed with spherical particles in COMSOL.

I have a cylinder and I want to put inside 1e9 spherical particles. Is that possible?

Regards,
1 Reply Last Post Nov 6, 2012, 5:37 p.m. EST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Nov 6, 2012, 5:37 p.m. EST
Hi
Possible, probably yes, if you have enough RAM and time,

But I would suggest that you start to ask yourself how many DoF you will end up with and about how much RAM you would need, I'm afraid you need a good sized cluster, or have I missed something ?

--
Good luck
Ivar
Hi Possible, probably yes, if you have enough RAM and time, But I would suggest that you start to ask yourself how many DoF you will end up with and about how much RAM you would need, I'm afraid you need a good sized cluster, or have I missed something ? -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content