Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to draw a parabolic shaped solid?

Posted Nov 14, 2012, 11:59 a.m. EST Low-Frequency Electromagnetics, Geometry Version 4.3a 1 Reply

Tuotuo Chen
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi there,

I am trying to draw a parabolic shaped solid to present an AFM tip. I can draw a parabolic curve in 2D using the paramatric curve function. Then I can do revolve of the prabolic curve. Finally I get a parabolic shell structure insdead of a parabolic solid?
Can you tell me how to get a parabolic solid? Thank you very much!
1 Reply Last Post Nov 14, 2012, 2:42 p.m. EST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Nov 14, 2012, 2:42 p.m. EST
Hi

check the convert to solid function of the geoemtry, it should work ;)

--
Good luck
Ivar
Hi check the convert to solid function of the geoemtry, it should work ;) -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content