Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

could anyone can help me to draw a spherical cap

Posted Nov 27, 2012, 5:36 a.m. EST Acoustics & Vibrations, Geometry Version 4.2 4 Replies

Joe Hanks
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

i want to study the sound radiation from a spherical cap. and i need to get the regular meshes at the surface of the spherical cap, thanks a lot for the person who gives help to me.
4 Replies Last Post Dec 19, 2016, 7:35 p.m. EST
Josh Thomas Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Nov 27, 2012, 2:05 p.m. EST
Joe-

Attached is an mph file that may help you get started.

Regards,
Josh
Joe- Attached is an mph file that may help you get started. Regards, Josh

Attachments:

Joe Hanks
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Nov 28, 2012, 4:07 a.m. EST
Josh

Thanks a lot for your help, but i can't open the file with edition 4.2, could you give me the file with edition 4.2?

Joe
Josh Thanks a lot for your help, but i can't open the file with edition 4.2, could you give me the file with edition 4.2? Joe
Josh Thomas Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Nov 28, 2012, 9:03 a.m. EST
Joe-

I created the file with v4.3a which is the most recent release.

Unfortunately, the oldest version I can re-create it in is v4.2a.

Basic instructions...

Geometry:
Add a sphere
Add the air domain surrounding the sphere

Mesh:
Right-click mesh and select free triangular
Add the boundaries of your sphere to the selection list

This may help you get started.

Regards,
Josh
Joe- I created the file with v4.3a which is the most recent release. Unfortunately, the oldest version I can re-create it in is v4.2a. Basic instructions... Geometry: Add a sphere Add the air domain surrounding the sphere Mesh: Right-click mesh and select free triangular Add the boundaries of your sphere to the selection list This may help you get started. Regards, Josh
Nathan Woodard
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago Dec 19, 2016, 7:35 p.m. EST
Hi Josh,
Ah. Great post. Thanks!! These little geometry tricks are incredibly helpful to new users!!
-N
Hi Josh, Ah. Great post. Thanks!! These little geometry tricks are incredibly helpful to new users!! -N

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content