Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to find, save, and use the variable value in specific time in model setting
Posted Mar 12, 2024, 10:50 p.m. EDT Studies & Solvers, Modeling Workflow Version 6.2 1 Reply
Please login with a confirmed email address before reporting spam
Deal all
I would like to ask some technical issues.
Assume that the PDE problem, where variable is called S.
when S(t=5)<=S(t=4), then save S(t=4) in a variable K. Again, if S(t=13)<=S(t=12), then save S(5=12) in that variable K. Therefore, K(1)=S(t=4) and K(2)=S(t=12).
The above problem is very easy adoped in MATLAB by using for circle and array [], but it seems that difficult adoped in COMSOL.
I would like to ask how to get the value in model setting so that it can be used in solving process.
Please login with a confirmed email address before reporting spam
Check this blog post by Walter Frei: https://www.comsol.de/blogs/using-the-previous-solution-operator-in-transient-modeling/
-------------------Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com