Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

boundary selection problem

Posted Dec 21, 2012, 1:48 a.m. EST Results & Visualization Version 4.3 2 Replies

David Segal
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam


Hi

When I move the pointer to a certain boundary and click, an adjacent boundary lights up

instead of the boundary I pointed at, how do I resolve this?

thanks

David

PS

this is a problem that suddenly turned up on all files including gallery models
2 Replies Last Post Dec 21, 2012, 5:22 a.m. EST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Dec 21, 2012, 3:32 a.m. EST
Hi

click several times until you get to the desired boundary,
or it's an issue with your graphics card, try using software rendering, and update COMSOL and/or graphics drivers if required. But check the version and compatibility list before changing everything ;)

--
Good luck
Ivar
Hi click several times until you get to the desired boundary, or it's an issue with your graphics card, try using software rendering, and update COMSOL and/or graphics drivers if required. But check the version and compatibility list before changing everything ;) -- Good luck Ivar
David Segal
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Dec 21, 2012, 5:22 a.m. EST


Hi

Thanks Ivar,

Ok the problem is also with domains : when I click on domain 2 - domain 1 lights up, when I click on domain 3

domain 2 lights up etc. There are only 6 domains so when I click on 1 then domain 6 lights up.

It doesn't look like a graphics problem.

David
Hi Thanks Ivar, Ok the problem is also with domains : when I click on domain 2 - domain 1 lights up, when I click on domain 3 domain 2 lights up etc. There are only 6 domains so when I click on 1 then domain 6 lights up. It doesn't look like a graphics problem. David

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content