Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Particle Bouncing Effect
Posted Apr 3, 2024, 5:52 a.m. EDT Modeling Tools & Definitions, Modeling Workflow, Physics Interfaces 0 Replies
Please login with a confirmed email address before reporting spam
Hi, we are simulating 2D and 3D model. The model consists of closed domain with 2 rollers moving towards each other (roller crusher machine), from the top wall we direct falling ore (stone particles) that are needed to be crushed. For this study we use The Particle Tracing Module.
The problem we struggle with is in results that we get we see a strong bouncing effect over moving rollers walls (which is not correct) rather than particles going between the rollers. Can somebody advice us how to correct this implementation of the particles at least in a 2D system?
Thank you!
Hello Elena Khlebnikova
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.