Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Electromagnetic Induction Tomography simple model

Posted Jan 20, 2013, 6:33 a.m. EST Low-Frequency Electromagnetics, Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.2, Version 4.2a 0 Replies

Firas El-Hamed
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I am trying to make a very simple 2D model where I have 2 coils in which in between is a medium (air). One of these coils will be excited and have a magnetic field in the direction of the second coil. I would like to measure the voltage induced in this second coil.

I am having trouble with creating a 2D coil sensor. I'm not sure how to create the coil.

Thanks,
0 Replies Last Post Jan 20, 2013, 6:33 a.m. EST
COMSOL Moderator

Hello Firas El-Hamed

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content