Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Parametric sweep results in a second study

Posted Jul 17, 2024, 10:55 a.m. EDT General, Studies & Solvers, User Interface Version 6.2 0 Replies

Rodrigo Pires
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello there,

I’m modeling an ultrasonic NDT using Elastic Waves, Time Explicit physics model. I want to collect electric potential results on the receiver on time and frequency domain, so I divided it in two studies, the first is the time domain analysis and the second is an FFT. For practical reasons, I’ve created a Parametric Sweep in the Study 1 (Time dependent) to change some geometrical factor, but now I can’t access the study swept cases separately to apply the FFT for frequency domain results. Someone know how to do it or if it’s even possible?

Thanks in advance!

0 Replies Last Post Jul 17, 2024, 10:55 a.m. EDT
COMSOL Moderator

Hello Rodrigo Pires

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content