Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

post-processing (plotting)

Brik Mostafa El Mehdi

Please login with a confirmed email address before reporting spam

hello, after a biphasic flow simulation "drop flows in other fluid" i hoped plotting my results, but i could not, beacause what i wanna draw it's a user difined characteristic, and i don't know how to implant that in comsol!!
CAN you help me please!!!!

1 Reply Last Post Jan 21, 2013, 2:26 p.m. EST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jan 21, 2013, 2:26 p.m. EST
Hi

as for plotting over a surface or an edge of your expression and you get the desired grph populated. With COMSOL most GUI entries reds umbers but also equations based on all the internal variables (once solved for)

--
Good luck
Ivar
Hi as for plotting over a surface or an edge of your expression and you get the desired grph populated. With COMSOL most GUI entries reds umbers but also equations based on all the internal variables (once solved for) -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.