Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Sound hard boundary condition in thermoviscous frequency domain

Posted Aug 8, 2024, 10:45 a.m. EDT Acoustics & Vibrations, Microfluidics Version 6.0 3 Replies

Rizwan Ullah
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi all,

I am solving a problem in thermoviscous frequency domain and I want to model the boundary of the material as a Sound Hard Boundary but I can't see this option in the Physics interface? Can someone help me with this?

3 Replies Last Post Aug 22, 2024, 2:26 a.m. EDT
Acculution ApS Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 months ago Aug 9, 2024, 4:02 a.m. EDT

It is the default boundary condition called Wall.

-------------------
René Christensen, PhD
Acculution ApS
www.acculution.com
info@acculution.com
It is the default boundary condition called Wall.
Rizwan Ullah
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 7 months ago Aug 21, 2024, 4:02 p.m. EDT

Thank you so much. You cleared my doubts. Thanks alot again

Thank you so much. You cleared my doubts. Thanks alot again
Acculution ApS Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 7 months ago Aug 22, 2024, 2:26 a.m. EDT

Note that you can have different types of walls (isothermal/adiabatic, slip/no-slip/...), so check if the 'standard' wall is what you are looking for or not.

-------------------
René Christensen, PhD
Acculution ApS
www.acculution.com
info@acculution.com
Note that you can have different types of walls (isothermal/adiabatic, slip/no-slip/...), so check if the 'standard' wall is what you are looking for or not.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content