Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

UNDO

Posted Jan 24, 2013, 6:58 a.m. EST Fluid & Heat, Heat Transfer & Phase Change, Computational Fluid Dynamics (CFD) Version 4.3a 3 Replies

Nithin
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

How to undo past actions in comsol 4.3a??
3 Replies Last Post Jan 24, 2013, 3:14 p.m. EST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jan 24, 2013, 10:19 a.m. EST
Hi

you have the "undo command", But given that some modifications triggers major node update actions hence the undo list is flushed regularly so you cannot really undo everything, but many things

--
Good luck
Ivar
Hi you have the "undo command", But given that some modifications triggers major node update actions hence the undo list is flushed regularly so you cannot really undo everything, but many things -- Good luck Ivar
Nithin
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jan 24, 2013, 11:09 a.m. EST

Hi

you have the "undo command", But given that some modifications triggers major node update actions hence the undo list is flushed regularly so you cannot really undo everything, but many things

--
Good luck
Ivar


How can I undo if anything is available??
[QUOTE] Hi you have the "undo command", But given that some modifications triggers major node update actions hence the undo list is flushed regularly so you cannot really undo everything, but many things -- Good luck Ivar [/QUOTE] How can I undo if anything is available??
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jan 24, 2013, 3:14 p.m. EST
Hi
In 4.3a you have the undo / redo icons (curved arrows), and or CNTRL-Z (if the undo icons are greyed then your buffer is/have been cleared

--
Good luck
Ivar
Hi In 4.3a you have the undo / redo icons (curved arrows), and or CNTRL-Z (if the undo icons are greyed then your buffer is/have been cleared -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.