Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Propagation loss in SAW devices
Posted Jan 29, 2013, 6:28 a.m. EST MEMS & Nanotechnology, Acoustics & Vibrations, MEMS & Piezoelectric Devices Version 4.2 1 Reply
Please login with a confirmed email address before reporting spam
Hello!
I use Comsol for SAW device simulations and design some time domain models for SAW delay line. Results (impulse responses) are rather good. Now I want to introduce propagation losses in my models. Standart definition of it is loss per unit length in dB / 1e-6s (dB to microseconds). How can I introduce it in my simulation?
I use Comsol for SAW device simulations and design some time domain models for SAW delay line. Results (impulse responses) are rather good. Now I want to introduce propagation losses in my models. Standart definition of it is loss per unit length in dB / 1e-6s (dB to microseconds). How can I introduce it in my simulation?
1 Reply Last Post Jan 30, 2013, 3:53 a.m. EST
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Sergey,
shouldn't the propagation loss be a consequence of the material loss properties?
Cheers
Edgar
shouldn't the propagation loss be a consequence of the material loss properties?
Cheers
Edgar