Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
difference between "optimization study node" and "optimization module" for an optimization problem
Posted Jan 31, 2013, 7:37 a.m. EST Version 4.3a 0 Replies
Please login with a confirmed email address before reporting spam
Seems an optimization problem can be performed by either "optimization study node" or "optimization module".
If use "optimization study node", the available optimization solvers include SNOPT and Levernberg-Marquardt
while if use "optimization module", then the available optimization solvers are Nelder Mead solver, Coordinate Search, Monte Caro.
What is the difference of above two approach? And how the two different set of solvers are related?
Thanks a lot in advance!
Xiaogai
Hello Xiaogai Li
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.