Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

show the field lines around a magnet

Posted Feb 17, 2013, 4:00 a.m. EST Low-Frequency Electromagnetics, Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.3a 1 Reply

Martin Kandl
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi.

How can show the field lines around a magnet?

Thank.
1 Reply Last Post Feb 17, 2013, 11:41 a.m. EST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Feb 17, 2013, 11:41 a.m. EST
Hi
you go under your plot and add the field line sub-node, define the field you want B (default normally), or H ... and then set the density distribution, if required

--
Good luck
Ivar
Hi you go under your plot and add the field line sub-node, define the field you want B (default normally), or H ... and then set the density distribution, if required -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content