Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Study 1 error
Posted Feb 19, 2013, 4:41 a.m. EST Version 4.3 0 Replies
Please login with a confirmed email address before reporting spam
I want to ask some questions. I can try make an example e-core magnet design. There is an error in the Study 1 section. When I right click the Study 1 and select show default solver, an error happens : " The DAE is structurally incostistent. Variables:2 Equations:1 Error in automatic sequence generation. "
I thinking one of the reason of the error is the External I Vs. U 2 I enter only p label parameter for 3, there is no n label parameter in the example.
The other problem, in the Gauge Fixing for A-Field 1 section, there is no "Constrain variable in at least one point" check box. I can not found it. Please can somebody help me?
Hello Asli Calis
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.