Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

design and analysis of 2d single axis capacitive accelerometer

Posted Apr 2, 2013, 3:39 a.m. EDT Low-Frequency Electromagnetics, Materials Version 4.2a 1 Reply

Sunil Chaluvaiah
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

hi,

While assigning the material air for domain i am getting the error in material contents for young"s modulus and poisson's ratio i.e it is showing stop signal. please can u explain me this error.

screen shot of the error page has been attached.

Attachments:

1 Reply Last Post Apr 2, 2013, 8:40 a.m. EDT
Sergei Yushanov Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Apr 2, 2013, 8:40 a.m. EDT
Sunil,

Remove air domain from Solid Mechanics node.

Regards,
Sergei
Sunil, Remove air domain from Solid Mechanics node. Regards, Sergei

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content