Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Permanent Magnet simulation
Posted Apr 2, 2013, 11:52 p.m. EDT 1 Reply
Please login with a confirmed email address before reporting spam
Hello Everybody,
I have posted before and I am doing it again though I am little bit on the knowledgable side. I am trying to simulate a permanent magnet using the Br option in the Magnetic Field, No Current physics. I even given a proper Br value. I have 2 D rectangle and an air domain. Ideally, it should solve but the simulation is not converging. I have tried fining the mesh but still it doesn't work, Can anyone help me out?
Thanks,
Pankaj
I have posted before and I am doing it again though I am little bit on the knowledgable side. I am trying to simulate a permanent magnet using the Br option in the Magnetic Field, No Current physics. I even given a proper Br value. I have 2 D rectangle and an air domain. Ideally, it should solve but the simulation is not converging. I have tried fining the mesh but still it doesn't work, Can anyone help me out?
Thanks,
Pankaj
1 Reply Last Post Apr 3, 2013, 2:04 a.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
how do you define your magnet ? (and you model you need to be a nbit more precise for us to undertzand) I usually use the Magnetisation and use hc as value (more or less valid for hard magnets with mu_r= 1 or there about and with a linear 2nd quadrant response (at lower temperatures way away from the Curie temperature ;)
--
Good luck
Ivar
how do you define your magnet ? (and you model you need to be a nbit more precise for us to undertzand) I usually use the Magnetisation and use hc as value (more or less valid for hard magnets with mu_r= 1 or there about and with a linear 2nd quadrant response (at lower temperatures way away from the Curie temperature ;)
--
Good luck
Ivar