Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

windings providing regarding

Posted Apr 11, 2013, 3:41 a.m. EDT 1 Reply

Kiran George
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Sir/madam,
I am doing my m.tech project in modeling of motor using COMSOL.3.5a in 2D. I would like to know the way in which i can provide my three phase windings in the stator slots.
Thanking you and expecting your kind support
Kiran George
1 Reply Last Post Apr 11, 2013, 3:04 p.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Apr 11, 2013, 3:04 p.m. EDT
Hi

the *3 phase can be obtained by supplying complex values to the current, use the "phasor" representation, check the doc, and I believe there are a few models about 3 phase current, even back in 3.5 times ;)

--
Good luck
Ivar
Hi the *3 phase can be obtained by supplying complex values to the current, use the "phasor" representation, check the doc, and I believe there are a few models about 3 phase current, even back in 3.5 times ;) -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content