Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Failed to evaluate variable in particle tracing module

Please login with a confirmed email address before reporting spam

Hello!
I'm trying to simulate particle temperature in particle tracing module.
But, when I try to plot a line graph of particle temperature, I see this:
Failed to evaluate variable
Variable - mod1. Tp
Geometry- 1
Boundary-10
Failed to evaluate expression


Can anyone help me with this?

1 Reply Last Post Apr 13, 2013, 5:12 p.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Apr 13, 2013, 5:12 p.m. EDT
Hi

it is most probably that your Tp is a field or Tp(x,y,z,t), and that Tp has not been defined in your geometry 1 and on bondary 10.

Check also heequation view and see where Tp is volid

--
Good luck
Ivar
Hi it is most probably that your Tp is a field or Tp(x,y,z,t), and that Tp has not been defined in your geometry 1 and on bondary 10. Check also heequation view and see where Tp is volid -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.