Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Linking swept with thets
Posted Apr 21, 2013, 1:17 p.m. EDT 4 Replies
Please login with a confirmed email address before reporting spam
How can i combine a swept and thet mesh together?
Picture shows actually totally my problem :D
Im done with the rest and really happy ;)
Picture shows actually totally my problem :D
Im done with the rest and really happy ;)
Attachments:
4 Replies Last Post Apr 22, 2013, 5:22 a.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
x
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
you have 2 ways:
1) in assembly modes with dedoubled boundaries, one can be coarse swep mesh, the other a finer tets or any other type (but this is not the way I would start with)
2) the default, you sweep your mesh, you select all boundries that are common to domains with TETH mesh and you apply a "mesh - convert node) such that all these boundaries have thereafter a triangular mesh (3 nodes), which is compliant with the teth mesh structure (4 nodes)
--
Good luck
Ivar
you have 2 ways:
1) in assembly modes with dedoubled boundaries, one can be coarse swep mesh, the other a finer tets or any other type (but this is not the way I would start with)
2) the default, you sweep your mesh, you select all boundries that are common to domains with TETH mesh and you apply a "mesh - convert node) such that all these boundaries have thereafter a triangular mesh (3 nodes), which is compliant with the teth mesh structure (4 nodes)
--
Good luck
Ivar
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Awesome it worked !!! Youre a genius man ;) Thanks a lot for the good work and advices.
For all who'll have this problem in time: I just refined the edges of the module in z y and x directions along the sandwich-element to make small elements possible because the rubber is nearly 1 mm thick so it fits best. Then i used the tool to convert nodes and made a diagonal line in the squares = 3 node elements. Then it worked perfectly.
For all who'll have this problem in time: I just refined the edges of the module in z y and x directions along the sandwich-element to make small elements possible because the rubber is nearly 1 mm thick so it fits best. Then i used the tool to convert nodes and made a diagonal line in the squares = 3 node elements. Then it worked perfectly.
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
Thanks, but I do not feel as a "genius" though,
I would rather say COMSOL is genius,
but I agree with all the liberty we have with this software there are many buttons available to tweak, it takes some time to learn them :)
--
Good luck
Ivar
Thanks, but I do not feel as a "genius" though,
I would rather say COMSOL is genius,
but I agree with all the liberty we have with this software there are many buttons available to tweak, it takes some time to learn them :)
--
Good luck
Ivar