Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

failure

Posted Apr 25, 2013, 5:42 a.m. EDT Materials Version 4.3 1 Reply

Emma Jjuuko
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

hi,
how can i detemine the maximum load capacity of a reinforced concrete beam
1 Reply Last Post Apr 25, 2013, 7:13 a.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Apr 25, 2013, 7:13 a.m. EDT
Hi

from estimating the stresses induced on the critical parts, and applying the relevant security factors to these to be well below yield levels.

But as this depends on the model, the definition of the critical parts, the load(s), the material(s) and the security factors applicable, it's not really possible to say much more

--
Good luck
Ivar
Hi from estimating the stresses induced on the critical parts, and applying the relevant security factors to these to be well below yield levels. But as this depends on the model, the definition of the critical parts, the load(s), the material(s) and the security factors applicable, it's not really possible to say much more -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content