Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Fine meshing problem.

Posted Apr 30, 2013, 6:32 a.m. EDT Geometry, Mesh Version 4.3a 0 Replies

Peter Barrow
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I have been deperately trying to mesh the attached geometry. I have a free tetrahedral error (boundaries not respected) between the thin, spiderweb like wire grid, and the encompassing volume (vacuum). I have tried splitting this volume up and redefining meshing sizes around the wire grid. I have split the geometry up and have tried meshing individually as much as I can but nothing seems to be working. Does anyone have any ideas to help me?

Cheers
0 Replies Last Post Apr 30, 2013, 6:32 a.m. EDT
COMSOL Moderator

Hello Peter Barrow

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content