Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
generating the graph
Posted May 3, 2013, 1:34 a.m. EDT 1 Reply
Please login with a confirmed email address before reporting spam
I am designing a model of saw resonator and i want to see the admittance vs frequency graph but i dont know how to generate this graph , i am new to comsol . please help.
1 Reply Last Post May 3, 2013, 1:46 a.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
if you use the lumped port/terminal for your signal input, then COMSOL creates variables ()pre-integrated and global) for you, that you might get under the Results Derived variables.
If you are new to COMSOL it's really worthwhile to
a) attend a few of the COMSOL organised 1 day courses,
b) look at many webinars and the recorded seminars/ videos on the main WEB site
--
Good luck
Ivar
if you use the lumped port/terminal for your signal input, then COMSOL creates variables ()pre-integrated and global) for you, that you might get under the Results Derived variables.
If you are new to COMSOL it's really worthwhile to
a) attend a few of the COMSOL organised 1 day courses,
b) look at many webinars and the recorded seminars/ videos on the main WEB site
--
Good luck
Ivar