Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Brinkman Equation; Anisotropic Permeability

Posted May 7, 2013, 3:36 p.m. EDT Fluid & Heat Version 4.3a 0 Replies

Ali Albinali
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Can I specify an anisotropic permeability with COMSOL 4.3a; Subsurface Flow Module; Brinkman Equation?

When I go to user defined, I can assign a single value only. I can't enter a tensor or specify "Diagonal, anisotropic or symmetric". Please let me know if you have a way to do it.

Thank you very much,
0 Replies Last Post May 7, 2013, 3:36 p.m. EDT
COMSOL Moderator

Hello Ali Albinali

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content