Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Automatic remeshing at the specific time steps

Posted May 14, 2013, 2:11 a.m. EDT Mesh Version 4.3a 0 Replies

Wenyu Xu
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi everyone,

The automatic remeshing for Deformed geometry or Moving mesh model can only use the mesh quality as the remeshing criteria.

Is there any way to force Comsol to remesh at the specific time steps? Thanks.

Wenyu
0 Replies Last Post May 14, 2013, 2:11 a.m. EDT
COMSOL Moderator

Hello Wenyu Xu

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content