Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Port to use for semi rectangular shaped coaxial cable excitation
Posted May 14, 2013, 2:40 a.m. EDT Low-Frequency Electromagnetics, RF & Microwave Engineering Version 4.0a, Version 4.2 1 Reply
Please login with a confirmed email address before reporting spam
Hi
I am facing problem in assigning port parameters for semicircular coaxial cable excitation. If it is circular then can use coaxial port type also if rectangular coaxial port we can use rectangular port. But if the port is semi rectangular or any other irregular shape then defining it as coaxial/rectangular port yields error message. Please help.
Thanks.
Saimoom
I am facing problem in assigning port parameters for semicircular coaxial cable excitation. If it is circular then can use coaxial port type also if rectangular coaxial port we can use rectangular port. But if the port is semi rectangular or any other irregular shape then defining it as coaxial/rectangular port yields error message. Please help.
Thanks.
Saimoom
1 Reply Last Post May 14, 2013, 3:36 p.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Saimoom,
For port of irregular shape, you can use Boundary Mode Analysis study type to find propagating mode shape. There are couple of the examples in the Comsol model library explaining how to use Boundary Mode Analysis.
Regards,
Sergei
For port of irregular shape, you can use Boundary Mode Analysis study type to find propagating mode shape. There are couple of the examples in the Comsol model library explaining how to use Boundary Mode Analysis.
Regards,
Sergei