Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Joule heating in a conductor

Please login with a confirmed email address before reporting spam

I'd like to model a cable covered with a insulation. The current of 10A is flowing through the cable.
I do not have any parts grounded. I used the "Terminal" option as suggested in the COMSOL example for modeling a fuse. but it is not working. Any suggestion?

1 Reply Last Post Jul 27, 2015, 6:33 a.m. EDT
COMSOL Moderator

Hello Azam Nekahi

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.


Please login with a confirmed email address before reporting spam

Posted: 9 years ago Jul 27, 2015, 6:33 a.m. EDT
Check out the busbar model in the Comsol model library.
Check out the busbar model in the Comsol model library.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.