Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Line plots for stress distribution

Posted Jun 16, 2013, 3:23 p.m. EDT Results & Visualization, Structural Mechanics 0 Replies

Ankit Parikh
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi everyone,

I'm running a simulation on a micro cantilever coated with a film. My goal is to observe the deformation and stress distribution on the cantilever, under the application of temperature differential and compressive boundary load on the film.

I have the results, but I need to generate a 2D plot of the stress values vs. the width of the cantilever, to see how it varies about 3 microns from the fixed end. I'm using Comsol 4.3. How can I go about doing this ?
0 Replies Last Post Jun 16, 2013, 3:23 p.m. EDT
COMSOL Moderator

Hello Ankit Parikh

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content