Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Piezoelectric axis definition
Posted Jun 24, 2013, 2:48 a.m. EDT Geometry, Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.3 0 Replies
Please login with a confirmed email address before reporting spam
I have some questions regarding the piezoelectric physics in the COMSOL. I'm using COMSOL multiphysics 4.3
Correct me if I'm wrong, in 3D model, the axes are 1 (x) (horizontal axis), 2 (y) (out of the plane), and 3 (z) (vertical axis). However, in 2D model, x is horizontal axis and y is vertical axis and z is out of plane axis.
For the piezoelectric stiffness coefficient tensor, the matrix components are defined according to the axis in 3D model. The question is that when I use 2D model, how to make sure that the z axis will stay as vertical axis? (so i need to work on x-z plane for my 2D model)
Thank you very much in advance,
Best regards,
Govindo
Hello Govindo Syaranamual
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.