Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
GRI Mechanism 3.0
Posted Jun 27, 2013, 4:31 p.m. EDT Chemical Reaction Engineering Version 4.2a 1 Reply
Please login with a confirmed email address before reporting spam
Dear Sir / Madam
I need to model two counterflow burners for measuring the NOx formation in case of natural gas combustion. For this purpose I need to upload the entire GRI Mechanism of methane combustion which has around 33 species and more than 300 reactions. Is there any method to couple the GRI mechanism (for kinetics and thermodynamics properties) directly to COMSOL or do I have to type in each and every reaction?
Thanks,
Regards
Abhishek
I need to model two counterflow burners for measuring the NOx formation in case of natural gas combustion. For this purpose I need to upload the entire GRI Mechanism of methane combustion which has around 33 species and more than 300 reactions. Is there any method to couple the GRI mechanism (for kinetics and thermodynamics properties) directly to COMSOL or do I have to type in each and every reaction?
Thanks,
Regards
Abhishek
1 Reply Last Post Jul 2, 2013, 10:41 a.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi,
you should convert your entire mechanism in chemkin file format, and import chemkin file into comsol.
cheers
you should convert your entire mechanism in chemkin file format, and import chemkin file into comsol.
cheers