Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Vibrating plate at air and heat transfer
Posted Jul 22, 2013, 4:16 a.m. EDT 0 Replies
Please login with a confirmed email address before reporting spam
My model is 2D vibrating plate at air that blow air to a hot cylinder, I used Fluid-structure interaction to model the vibrating plate and air domain, notice that there isn't ant inflow and air must move just because of plate's vibration, for heat transfer on cylinder surface, I used heat transfer in fluids physics.
For plate, I used a cantilever beam and put point load as wv1(t), I used sine function for wv1 already.
When I run my model, it takes so much time and finally gives error that it doesn't converge.
I changed my mesh and small time interval to get the result faster, but didn't solve the problem.
Would you please help me to solve this problem?
Attachments:
Hello Steve Daken
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.