Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Question about model ID:9408
Posted Jul 25, 2013, 11:19 p.m. EDT Fluid & Heat, Heat Transfer & Phase Change Version 4.3, Version 4.3a, Version 4.3b 0 Replies
Please login with a confirmed email address before reporting spam
I was checking model id 9408, it's vibrating beam in fluid flow, my questions:
1- I like to have Sine vibration for beam, I replaced point load in this model that it'a Gaussian pulse with Sine wave, but it doesn't work! I just changed the load type, and I used really small time step to catch the the frequency of vibration. I didn't change any other thing, I used really fine mesh too, but doesn't converge yet!
2- If I could get this vibration for beam ( sine load at tip), I like to put a cylinder in front of this fluid, to check heat transfer on the surface, so I added heat transfer in physics, should I do any other thing?
Waiting for nice replies.
Regards
Hello Tomy Raybon
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.