Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

vibration of film,model by Structural Mechanics

Posted Sep 3, 2013, 8:42 p.m. EDT 0 Replies

Li Yujin
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Recently, I model vibration of film, because I want to compare the Eigenfrequency of 3D and 2D, my model is Structural Mechanics, not Shell or membrane; I find the mesh affects the solution result,
the parameter list:
3D and 2D
L 500[mm] Length width(3D)
thic 0.2[mm] Thickness
T0 100[MPa]*thic Pre-tension force
E1 200[GPa] Young's modulus
rho1 7850[kg/m^3] Density
nu1 0.33 Poisson's ratio

Boundary fixed

the eigenfrequency of solution result of 3D and 2D is following:
2D 3D
f1: 4.322977 Hz f11:7.25292 Hz
f2: 12.093578 Hz f21:14.576149 Hz
f3: 23.74789 Hz f22:21.471876 Hz
f4: 39.27272 Hz
f5:58.67358 Hz

the relation is f11=sqrt(2)*f1; but is wrong, why? Please Somebody may help me, or teache me how to set?

cheers

Brain Lee

Attachments:

0 Replies Last Post Sep 3, 2013, 8:42 p.m. EDT
COMSOL Moderator

Hello Li Yujin

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content