Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
anisotropic material
Posted Sep 17, 2013, 5:37 a.m. EDT Low-Frequency Electromagnetics, RF & Microwave Engineering Version 4.3 2 Replies
Please login with a confirmed email address before reporting spam
I would like to build an RF wave guide that consists of three regions the left and right are made of air and the middle is made of an anisotropic material where epsilon (permittivity) is constant, but mu (permeability) defined as a tensor (mu_x 0; 0 mu_y). So how to define those quantities in COMSOL?
Please login with a confirmed email address before reporting spam
To define anisotropic properties do the following:
1. Right-click “Electromagnetic Waves, Frequency Domain (emw)” node and select “Wave Equation, Electric”
2. Go to “Wave Equation, Electric” setting window and select middle layer in the “Domain Selection” section
3. Under “Magnetic Field” section:
-From the “Electric permeability” list, select “User defined” and “Diagonal”
-In the “mur” table, enter components of relative permeability tensor
Regards,
Sergei
Attachments:
Please login with a confirmed email address before reporting spam